IR Optical Dome for UAV Gimbal Thermal Imaging Pod Case Study

IR Optical Dome for UAV Gimbal Thermal Imaging Pod Case Study

Summary

North American drone gimbal maker needed a lightweight IR dome for their 3-axis EO/IR pod. We delivered DLC-coated multispectral ZnS dome, 35% lighter, dual-band visible + LWIR transmission, 200+ flight hours with zero defects. Now qualified for 2,000+ units annual production.

Case Study

IR Optical Dome for UAV Gimbal Thermal Imaging Pod

DLC-coated multispectral ZnS dome enables 8–14μm thermal imaging on lightweight drone EO/IR gimbal systems

Customer Background

A North American drone gimbal manufacturer needed a custom IR dome for their next-generation 3-axis stabilized EO/IR pod. The pod integrates a visible-light camera and a 640×512 LWIR thermal camera into a single gimbal, used for industrial inspection, search-and-rescue, and public safety operations.

Previous dome supplier could not meet their weight target and environmental durability requirements, causing vibration blur during high-speed flight and micro-cracks after 50 flight hours.

Technical Challenges

Ultra-Lightweight Requirement

Dome weight must be minimized to preserve gimbal payload capacity and flight time — target wall thickness < 3mm.

Bird Strike & Rain Erosion

Dome must withstand high-speed rain erosion and bird impact during flight without optical distortion.

Dual-Band Optical Performance

Visible camera + LWIR 8–14μm thermal camera must both see through the same dome — no visible band absorption.

Aerospace Environmental Spec

-40°C to +70°C operating, altitude 4000m, humidity, vibration and thermal shock per aerospace standards.

Material Selection Process

We evaluated three IR materials against the gimbal's requirements:

Material Weight (density) Rain Erosion Resistance Dual-Band (Vis+LWIR) Selected?
Multispectral ZnS + DLC 4.09 g/cm³ (medium) Excellent (DLC coated) ✓ Transmits visible + IR ✓ SELECTED
CVD ZnSe 5.27 g/cm³ (heavy) Poor (soft surface) ✗ Opaque to visible ✗ Too heavy, no visible
Germanium 5.33 g/cm³ (heaviest) Poor (brittle) ✗ Opaque to visible ✗ Too heavy + temp limit

We recommended multispectral CVD ZnS with DLC (diamond-like carbon) coating — the only material that transmits both visible and LWIR bands, survives rain erosion, and stays within the weight budget. Learn more in our ZnS material guide and Germanium material comparison.

Our Solution

  • Material: Multispectral CVD ZnS, double-side polished
  • Geometry: Hemispherical dome, OD 63mm, wall thickness 2.8mm (weight-optimized)
  • Coating: DLC (diamond-like carbon) outer surface + broadband AR inner surface
  • Optical Performance: >75% transmission across 0.4–12μm (visible + LWIR dual-band)
  • Mounting: Precision flange ground to customer's gimbal housing, anti-reflection black edge paint
  • Surface Quality: 40/20 scratch-dig, wavefront error λ/4 at 633nm

Test Results & Field Performance

-35%
Weight Reduction vs Previous Dome
200+ hrs
Flight Test Hours Completed
0 cracks
Rain Erosion & Vibration Tests

Customer reported stable thermal imaging with no vibration blur, clear visible camera view, and zero dome defects after 200+ flight hours across desert, coastal and high-altitude environments. They have since qualified our ZnS dome for their production gimbal line with annual volume of 2,000+ units.

Related Resources