IR Window for Automotive Night Vision Thermal Camera Case Study

IR Window for Automotive Night Vision Thermal Camera Case Study

Summary

German automotive Tier-1 needed a durable IR window for thermal night vision cameras. We delivered DLC-coated germanium window, >92% transmission, -40~85°C qualified, now in 500k+/yr series production for premium vehicles.

Case Study

IR Window for Automotive Night Vision Thermal Camera

DLC-coated germanium window for automotive thermal night vision systems — road safety sensing in total darkness

Customer Background

A German automotive Tier-1 supplier needed a custom IR window for their next-generation automotive thermal night vision camera. The camera is integrated into the front grille of premium passenger vehicles and commercial trucks, detecting pedestrians, animals and vehicles beyond headlight range in total darkness.

Previous window supplier struggled to meet automotive-grade reliability requirements — windows developed micro-cracks after thermal cycling vibration testing, and DLC coating peeled off after road salt exposure.

Technical Challenges

Automotive Temp Range

-40°C to +85°C operating, under-hood heat soak, rapid thermal cycling from winter to summer conditions.

Road Salt & Chemical Resistance

Front grille exposed to road salt, washer fluid, bird droppings, insect impacts — coating must not peel or haze.

Vibration & Impact

Road vibration, stone chip impact, car wash brushes — window must survive 10-year vehicle service life.

High-Volume Cost Target

Automotive production requires millions of units per year — cost per window must be competitive at scale.

Material Selection Process

We evaluated three IR materials against automotive night vision requirements:

Material 8–14μm Transmission DLC Available Cost at Volume Selected?
Germanium + DLC Excellent (high index) ✓ DLC proven Medium (process optimized) ✓ SELECTED
Multispectral ZnS + DLC Good (lower index) ✓ DLC available High (larger blank needed) ✗ Oversized optics, costly
CVD ZnSe Good ✗ Not practical Very High ✗ Too expensive for auto

We recommended single-crystal germanium with DLC protective coating — the high refractive index (~4.0) enables a thinner, lighter window design that meets cost targets at automotive volumes. Learn more in our Germanium material guide.

Our Solution

  • Material: Single-crystal germanium, double-side polished
  • Geometry: Rectangular window, 32mm × 24mm, 1.8mm thick (thin for weight)
  • Coating: DLC (diamond-like carbon) outer surface + broadband AR inner surface
  • Optical Performance: >92% average transmission across 8–12μm LWIR band
  • Edge: Black painted edge for stray light suppression, chamfered corners for assembly
  • Quality: AOI 100% inspection, batch traceability, PPAP documentation available

Test Results & Production Status

>92%
Average Transmission (8–12μm)
-40~85°C
Thermal Cycling Passed
500k+/yr
Annual Production Volume

Customer validated our germanium windows through 3 years of automotive qualification testing, including thermal cycling, vibration, road salt spray, stone chip and car wash abrasion. The DLC coating showed no peeling, hazing or transmission loss after the full test cycle. Our window is now in series production for their premium vehicle program at 500,000+ units per year.

Related Resources