Aluminosilicate
Consider for projects emphasizing chemical strengthening, thinner structures, and mechanical performance.
AR AF AG Coated Glass for HMI Touch Panels - Felix Glass
- Price
- US $4.69-8.68
- Model
- MDG-0559
- MOQ
- 5 piece
Item specifics
- Customization
- Custom Size, OEM/ODM Available
- Coating Type
- AG anti-glare / AR anti-reflection / AF anti-finge
- Material
- High Quality Soda Lime / Borosilicate Glass
- Hardness
- 9H Tempered Glass, High Hardness
- Transmittance
- High Transmittance ≥92%
- Application
- HMI Touch Panels, Industrial Control, Human-Machine Interface
- Feature
- Anti-Scratch, Anti-Oil, Water Repellent, Easy to Clean
Review
Description
Felix Glass manufactures tempered display cover glass with AR anti-reflection, AG anti-glare, and AF anti-fingerprint surface options for industrial HMI touchscreens, outdoor kiosks, medical displays, marine controls, automation terminals, and other operator interfaces. The three functions can be specified individually or combined. AR reduces surface reflection, AG diffuses glare, and AF reduces oil and fingerprint adhesion. CNC shaping, edge finishing, black border printing, strengthening, coating, and inspection can be coordinated from an approved drawing. This product remains in the AR/AG/AF Coated Display Glass category. The values below retain the source product specification. Final substrate, coating sides, optical values, dimensions, printing, durability, and validation criteria are confirmed for each project. The source description lists the following project capabilities. Each value requires an agreed material, coating stack, measurement method, and acceptance plan. Browse the broader Felix Glass product catalog for other cover-glass and surface-treatment options. The source content references aluminosilicate and soda-lime substrates, while the visible attributes reference soda-lime and borosilicate glass. The correct material must be selected explicitly rather than inferred from these entries. Consider for indoor automation, commercial terminals, and programs where common supply and cost targets matter. Consider when thermal behavior or application-specific material properties justify evaluation. Material name alone does not determine coating adhesion, optical performance, or environmental life. Those outcomes depend on the complete process and test plan. The original description presents a closed-loop manufacturing route for coated HMI glass. Actual order and feasibility depend on the substrate, geometry, printing, strengthening method, and coating sides. Company and manufacturing background is available on About Us. AR can reduce reflection, AG can diffuse glare, and AF can reduce fingerprints and dust adhesion. Display brightness, sunlight angle, haze, and reflectivity should be evaluated together. Optical clarity and cleaning durability require a defined disinfectant, wiping material, load, cycle count, and regulatory scope. UV exposure, moisture, salt, temperature cycling, vibration, and sealing should be included in the environmental validation plan. AG can support long-duration viewing, while AF can reduce adhesion from oil and handling marks in workshop environments. Related surface-treatment and application articles are available in the Felix Glass blog. The original content describes two project types. They are retained as capability references rather than quantified performance guarantees. High-haze coated tempered glass with a black silk-screen border was described for payment kiosks and information terminals. Final reflection, haze, cleaning, and weathering targets require measured acceptance values. Low-haze, high-transmittance coated glass was described for touch-monitoring screens. Imaging, cleaning, coating durability, and regulatory documentation must match the end device. The source states that batch reports and SGS/ISO documents can support OEM audits. Buyers should verify report scope, sample identity, dates, issuing body, and current validity. Begin from the Felix Glass home page for broader capability information. The original content lists in-house AG etching, AR vacuum coating, AF nano coating, haze customization, prototype sampling, and volume OEM supply. It also states more than 19 years of optical-glass manufacturing experience. For procurement evaluation, confirm the exact processes performed in-house, production capacity, sample lead time, MOQ, lot-control method, yield assumptions, packaging, and commercial terms. The source claim “MOQ 1” should be verified for the selected configuration. It is used where a display cover needs a combination of reflection control, glare diffusion, and reduced fingerprint adhesion, including outdoor, medical, marine, and industrial HMI projects. The source states that the thin coatings do not interfere with the touch signal. The completed stack should still be validated with the chosen sensor, controller, cover thickness, bonding, grounding, and firmware. Yes. The source lists a 5%–25% range. The selected value should balance glare, sparkle, image sharpness, brightness, and viewing angle. The source describes compatibility with alcohol wiping and disinfectant cleaning. The exact chemical, concentration, cloth, load, cycles, and acceptance criteria must be tested. Yes, subject to drawing review, process limits, printing artwork, and dimensional inspection requirements. Use Contact Us to request the test data and documents needed for a specific application. The source content references single AG glass, single AR glass, AF+AG dual-coated glass, C/J chamfer cover glass, and 2.5D curved display glass. The appropriate configuration depends on whether glare, reflection, fingerprints, edge shape, or industrial styling is the primary design constraint. Send the drawing, substrate preference, thickness, coating sides, target haze, transmittance and reflectivity, edge profile, openings, printing artwork, cleaning chemicals, environmental tests, sample quantity, annual volume, documentation, and requested schedule.
Felix Glass Co., Limited · Model MDG-0559
1. AR, AG, and AF Coated Glass for Industrial HMI Displays
Source data consolidated
2. Coated HMI Glass Technical Specifications
Source material references Aluminosilicate, soda-lime, and borosilicate glass; selected by project Thickness range 0.7–6.0 mm, subject to size and processing review Hardness reference 9H listed for the tempered cover glass Compressive-stress reference CS 600–900 MPa listed for chemically strengthened configurations Coating configurations Double-sided AR, single- or double-sided AG, and nano AF combinations AG haze range 5%–25% adjustable reference Light transmittance At least 92% reference Surface reflectivity At most 1% reference Edge processing Straight, C/J chamfer, and 2.5D curved-edge polishing Printing-precision reference ±0.03 mm for black borders and sensor-window printing
Substrate selection
3. Aluminosilicate, Soda-Lime, and Borosilicate Options
Soda-lime
Borosilicate
Drawing-to-production workflow
4. CNC, Printing, Strengthening, and Coating Process
Problem-to-specification mapping
5. HMI Application Solutions
Outdoor kiosks
Medical touch monitors
Marine and vehicle controls
Factory automation
Source project examples
6. Outdoor Terminal and Medical Display Project References
Outdoor intelligent terminals
Medical device displays
Inspection and documentation
7. Optical, Haze, Stress, Coating, and Appearance Testing
Supply and engineering review
8. Prototype, Parameter Customization, and OEM Production
Parameter reviewHaze, transmittance, reflectivity, thickness, edge, printing, and coating sides.
Prototype qualificationSamples should be tested in the intended display and environmental stack.
Lot controlSampling, traceability, appearance limits, and optical consistency are agreed before volume orders.
Technical FAQ
9. AR, AG, and AF Coated Glass FAQ
What is AR/AG/AF coated glass used for?
Does the coating affect capacitive touch sensitivity?
Can haze be customized?
Can the coating withstand industrial cleaning?
Can size, edge, openings, borders, and logos be customized?
Related functional glass
10. Related Coated HMI Glass Configurations
RFQ input checklist
Send project requirements
11. Request a Custom HMI Coated Glass Quote
