Laboratory Light Splitting
Experimental optical paths for refraction, beam separation, and alignment work.
Send your drawing or sample requirement for a fast quotation. MOQ, lead time and coating options are confirmed within one business day.
Felix Glass Co., Limited supplies precision-ground and polished long rectangular triangular prisms for laboratory light splitting, optical measuring instruments, teaching equipment, industrial optical detection, and spectroscopy test platforms. As a China custom optical component manufacturer, we produce these prisms from N-BK7 optical glass. Learn more about the substrate in our N-BK7 optical glass material introduction.
The original product scope is retained: optional custom AR coating, drawing-based length and cross-section size, controlled optical tolerances, and a three-year warranty.
A long triangular measuring prism is an optical glass component with a triangular cross section extended along its length. Its polished faces can refract, redirect, or split light in laboratory and instrument setups. Unlike a catalog prism with one fixed size, this product can be reviewed against the required length, cross-section geometry, working wavelength, surface quality, flatness, angular tolerance, and coating.
For an accurate quotation, provide a drawing and identify which faces are optical, coated, referenced for angle control, or mechanically mounted.
Not sure what to include in your RFQ? Check our custom optics RFQ checklist to prepare complete technical specifications.
The original specifications remain in their existing sequence and should be confirmed on the approved production drawing.
| Material | N-BK7 optical glass | Prism type | Long rectangular triangular optical prism |
|---|---|---|---|
| Optional coating | Custom AR anti-reflection coating | Surface quality | 20/10; 60/40 optional |
| Surface flatness | 1/8 wave at 633 nm | Clear aperture | At least 80% of the central area |
| Angular tolerance | Up to plus or minus 3 arc minutes | Customization | OEM, ODM, and OBM custom length and cross-section size |
| Warranty | 3 years | Origin | Guangdong, China |
Experimental optical paths for refraction, beam separation, and alignment work.
Measuring and calibration equipment built around a defined prism geometry.
Physical optics demonstrations in school, university, and training laboratories.
Custom prism integration in inspection and optical detection systems.
Test assemblies used for spectral analysis and optical research.
Our AR-coated N-BK7 optical components also perform reliably in surveillance systems — see our PTZ surveillance optical dome case study for a real project reference.
The long format makes dimensional coordination important. A useful drawing defines overall length, triangular cross-section dimensions, face angles, datum surfaces, chamfers, edge protection, polished areas, clear aperture, and allowable cosmetic zones. These details help the prism fit its mount while preserving the required optical path.
Specify length, section dimensions, angles, and mechanical datums.
Mark polished faces, functional apertures, and non-optical areas.
Identify dimensional and optical acceptance criteria on the drawing.
Send your drawing, our optical engineer will review geometry feasibility and recommend tolerance grade.
Suitable when the optical design accepts normal glass-air surface reflections and no wavelength-specific coating is required.
Consider an anti-reflection coating when reduced reflection is required over a defined wavelength band and incidence range.
Provide wavelength, angle of incidence, polarization, coated faces, and performance target for review.
Confirm geometry, material, optical faces, tolerances, coating, and quantity.
Process the long prism and its functional surfaces to the agreed drawing.
Apply the approved AR coating to the specified optical faces.
Check agreed criteria and protect polished surfaces for shipment.
Yes. The original listing supports custom length and cross-section size; final feasibility follows the drawing and tolerance requirements.
No. Custom AR coating is optional and should be selected for the working wavelength and incidence conditions.
Send the drawing, dimensions, optical faces, wavelength, surface quality, flatness, angular tolerance, coating, quantity, and inspection needs. Check our RFQ checklist for a complete guide.
The original product listing states a three-year warranty.
Review the prism category, compare related prism formats, or send the drawing and project requirements to Felix Glass Co., Limited.
Send the required length, cross-section drawing, optical-face definition, wavelength, coating choice, tolerances, quantity, and delivery requirements for a practical engineering review.