Summary
Middle Eastern border authority needed rugged IR domes for 300km of desert perimeter. We delivered DLC-coated multispectral ZnS domes, dual-band visible + MWIR, surviving 5+ years of sand storms and extreme heat with zero failures.
Summary
Middle Eastern border authority needed rugged IR domes for 300km of desert perimeter. We delivered DLC-coated multispectral ZnS domes, dual-band visible + MWIR, surviving 5+ years of sand storms and extreme heat with zero failures.
Multispectral ZnS IR dome for 24/7 border and critical infrastructure thermal monitoring — see in total darkness, fog and smoke A Middle Eastern national border authority needed thermal surveillance domes for 300km of remote border fence line. Each monitoring pole mounts a combined visible-light PTZ camera and a cooled MWIR thermal camera, operating 24/7 in desert extreme conditions. Previous dome material failed within 6 months — UV degradation in extreme desert sun, sand storm abrasion scratching the surface, and internal condensation causing transmission loss. The customer needed a dome that survives 10+ years of unattended desert operation. Surface temperatures up to 70°C, year-round intense UV radiation — coating must not yellow, craze or delaminate. Frequent sand and dust storms — dome surface must resist scratching and maintain optical clarity. Visible camera + MWIR 3–5μm thermal camera both look through same dome — dual-band transmission required. Remote locations, no maintenance access — dome must survive 10+ years without on-site service. We evaluated three IR materials for the border surveillance dome: We recommended multispectral CVD ZnS with DLC protective coating — the only material that transmits both visible and MWIR bands, stands up to desert UV and sand abrasion, and handles outdoor temperature swings without transmission loss. Learn more in our ZnS material guide. Customer reports clear thermal imaging day and night, zero dome replacements after 5+ years of desert deployment. The DLC coating shows no visible scratching or yellowing despite regular sand storms. The system has successfully detected and alerted on multiple border incursions, validating the dome's optical performance in real-world conditions. Looking for visible-light surveillance domes? See our complementary case study: AR-coated N-BK7 optical dome for outdoor PTZ surveillance cameras. Combined, Felix Glass supplies both visible and IR dome solutions for integrated multi-spectrum security systems. Need a rugged IR dome for your perimeter security system? Send us your drawing →IR Dome for Perimeter Security Thermal Surveillance
Customer Background
Technical Challenges
Extreme Desert UV & Heat
Sand Storm Abrasion
Dual-Spectrum Imaging
Unattended 10-Year Lifespan
Material Selection Process
Material
UV / Weather Resistance
Dual-Band (Vis+MWIR)
Abrasion Resistance
Selected?
Multispectral ZnS + DLC
Excellent (proven outdoors)
✓ Visible + 3–5μm MWIR
Excellent (DLC hard coat)
✓ SELECTED
CVD ZnSe
Good, but soft surface
✗ Opaque to visible
Poor (scratches easily)
✗ No dual-band, soft
Germanium
Poor (heats up outdoors)
✗ Opaque to visible
Fair (with DLC)
✗ Fails at desert temps
Our Solution
Test Results & Field Performance
Related Resources
For a new thermal surveillance housing, explore our MWIR and LWIR dome manufacturing options. Define the detector band, substrate grade, optical geometry, coating and environmental acceptance plan; this case does not qualify a different assembly.