Custom C-Plane Sapphire Display Cover Glass Manufacturer | AR+AF Coated
Custom C-Plane Sapphire Display Cover Glass Manufacturer | AR+AF Coated
Custom C-Plane Sapphire Display Cover Glass Manufacturer | AR+AF Coated
Custom C-Plane Sapphire Display Cover Glass Manufacturer | AR+AF Coated
Custom C-Plane Sapphire Display Cover Glass Manufacturer | AR+AF Coated
Custom C-Plane Sapphire Display Cover Glass Manufacturer | AR+AF Coated
Model
FG-sdc-020

Item specifics

Base Material
Optical-grade single crystal sapphire (C-plane)
Mohs Hardness
Grade 9
Standard Thickness
0.6mm / 0.8mm / 1.0mm customizable
Working Temp
-40℃ ~ 120℃ continuous
Coating
AR anti-reflection + AF anti-fingerprint composite coating
Dimensional Tolerance
±0.005mm
Surface Quality
20-10 scratch & dig grade

Review

Description

Custom C-Plane Sapphire Display Cover Glass Manufacturer

Send your drawing or sample requirement for a fast quotation. MOQ, lead time and coating options are confirmed within one business day.

Request a Quote

C-plane single crystal sapphire for automotive HMI

Custom Automotive Sapphire Display Cover GlassC-Plane Single Crystal Sapphire for Vehicle HMI Touch Panels

Automotive sapphire display cover glass is a precision-machined, optical-grade single crystal sapphire panel used as the outer protective surface of a vehicle central control touch display. With Mohs 9 hardness, it is selected when hard interior parts, service tools, rings, keys, or repeated cleaning can cause cosmetic damage or functional screen failure on conventional cover materials.

Felix Glass, a China custom optical component manufacturer with 23+ years of precision glass and sapphire experience, supports drawing-based C-plane sapphire covers in 0.6 mm, 0.8 mm, and 1.0 mm standard thickness options, with custom CNC edges, holes, AR anti-reflection coating, and AF anti-fingerprint coating for automotive equipment manufacturers.

Mohs 9 scratch resistance -40℃ to 120℃ specified operating range ±0.005 mm dimensional tolerance
Request Drawing Review
Felix Glass C-plane single crystal sapphire blanks for automotive touch screen cover
Material, crystal orientation, outline, coating stack, and acceptance criteria are confirmed against the customer drawing.
Engineering value

Core Advantages of Sapphire For Vehicle Touch Displays

The material choice is most valuable where long service life, optical stability, and resistance to hard-contact scratches matter more than lowest initial part cost.

Hard-contact protection

Mohs 9 sapphire resists scratching from most common cabin materials and helps preserve the optical surface through repeated use and cleaning.

Stable display clarity

Optical-grade single crystal material provides a consistent protective window for high-resolution center displays when the crystal orientation, polish, and coating are correctly specified.

Temperature stability

The specified -40℃ to 120℃ continuous range supports programs that must tolerate vehicle storage, operation, and temperature cycling conditions.

Touch-surface usability

AF coating reduces fingerprint adhesion and simplifies routine cleaning; AR coating helps manage surface reflection in bright cabin conditions.

Drawing review baseline

Material Physical & Optical Performance Data

These values define the requested product baseline. Final inspection methods, sampling plan, coating targets, and acceptance limits are documented on the approved project specification.

Specification item Requested baseline Engineering relevance
Base material Optical-grade single crystal sapphire, C-plane Hard, chemically stable optical protection
Mohs hardness Grade 9 Resistance to hard-contact surface scratches
Standard thickness 0.6 mm / 0.8 mm / 1.0 mm; custom review available Mechanical stack-up, weight, and assembly design
Working temperature -40℃ to 120℃ continuous Vehicle operating and storage environment planning
Coating AR anti-reflection + AF anti-fingerprint composite coating Display readability and touch-surface maintenance
Dimensional tolerance ±0.005 mm Fit with display, adhesive, bezel, and housing datums
Surface quality 20-10 scratch & dig grade Cosmetic and optical inspection baseline

For the underlying substrate behaviour behind these values — thermal limits, chemical resistance and corrosion mechanisms — see our sapphire optical glass material guide.

Cleanroom CNC machining for automotive sapphire display cover edge chamfer
CNC route planning should reference functional datums, edge strength, hole geometry, and the intended assembly method.
Drawing-based geometry

Custom CNC Edge & Hole Processing Options

Felix Glass reviews 2D and 3D files for outer-profile machining, corner radii, chamfers, steps, slots, through-holes, sensor openings, and non-standard cutouts. Engineering feedback focuses on manufacturability and the risk of concentrated stress around thin edges and internal features.

  • Custom perimeter, radius, and chamfer geometry
  • Camera, sensor, fastener, and connector openings
  • Datum-based dimensional inspection to the approved drawing
  • Edge finishing and protective packaging matched to part geometry
Send CNC Drawing for DFM Review
Functional surface stack

AR+AF Composite Coating Technical Parameters

The AR layer is engineered around the display spectrum, viewing angle, and reflection target. The AF top layer is selected for touch interaction, cleanability, and compatibility with the underlying AR stack. Coating performance must be confirmed using project-specific optical and durability criteria rather than a generic transmission claim.

Inputs for AR design

Target wavelength band, incident angle, reflectance goal, display stack, and coating side.

Inputs for AF validation

Contact-angle target, cleaning agent, abrasion method, touch frequency, and acceptance limit.

Request AR+AF Coating Specification
Dual AR AF coated sapphire protective glass for car central control display
Coating requirements are frozen only after the optical stack and vehicle-use conditions are reviewed.
Validation planning

Wide Temperature Cycle Resistance Test Report

A project test report should identify the sample configuration, coating lot, fixture, temperature profile, dwell time, ramp rate, cycle count, inspection method, and acceptance criteria. The requested -40℃ to 120℃ range is the product baseline; it is not presented as a completed program-specific test result until the agreed test plan has been executed.

Pre-test appearance and dimension record Low/high temperature dwell and transition profile Post-cycle coating, optical, and cosmetic inspection Traceable sample and lot identification
Temperature cycling durability test for automotive sapphire cover glass
Test conditions and pass criteria are tied to the customer-approved automotive validation plan.
Mechanical stack selection

Standard Size & Thickness Selection List

Thickness selection should be made with the active display area, unsupported span, adhesive geometry, edge protection, touch performance, impact requirement, and assembly load in view.

0.6 mmUltra-thin option for tightly controlled, weight-sensitive assemblies after mechanical review.
0.8 mmBalanced option for thin center-display stacks requiring added handling margin.
1.0 mmHigher section thickness for assemblies prioritizing stiffness and handling robustness.
CustomNon-standard thickness, outline, and size reviewed against drawing and process capability.
Inspection definition

Surface Quality Grade Standard

The requested 20-10 scratch & dig grade applies to the defined optical area and must be paired with an agreed inspection method, illumination, viewing distance, cosmetic zones, edge criteria, and coating-defect limits. Separate acceptance zones can be established for the active display area, printed border, adhesive region, holes, and finished edges.

Zone A active optical viewing area Zone B border and adhesive interface Zone C machined edge and opening features
Finished sapphire display cover installed on automotive HMI touch panel
Appearance standards should reflect the viewing conditions of the assembled automotive HMI.
Program planning

OEM Sample & Mass Production Lead Time

Lead time is confirmed after drawing, quantity, raw-material availability, CNC complexity, coating route, inspection documentation, and packaging requirements are reviewed. The project follows a controlled progression so procurement and engineering teams can freeze risks before volume release.

  1. 1. Drawing reviewConfirm geometry, tolerances, material, coating, and application.
  2. 2. DFM feedbackResolve edge, hole, datum, coating-mask, and inspection questions.
  3. 3. Sample buildProduce and inspect prototypes to the approved drawing.
  4. 4. QualificationComplete agreed optical, coating, environmental, and assembly checks.
  5. 5. Production releaseFreeze control plan, packaging, lot traceability, and shipment schedule.

Step 1 moves fastest when the drawing already carries tolerances, datum scheme, cosmetic zones and inspection standard. The custom optics RFQ checklist lists every field so the first review does not stall on missing information.

Request Sample Build Schedule
Anti-scratch vacuum packaging for automotive sapphire cover glass batch shipment
Part-to-part separation, clean handling, and geometry-specific protection reduce shipment and assembly damage risk.
Integration checklist

Vehicle Assembly Matching Suggestions

  • Define active area, black-border or mask requirements, and optical bonding stack.
  • Reference housing and display datums; avoid over-constraining the sapphire panel.
  • Specify adhesive type, bond-line thickness, cure conditions, and edge clearance.
  • Review thermal-expansion mismatch, bezel contact, and local stress at holes and corners.
  • Validate touch sensitivity, display luminance, reflection, and cleaning behavior after assembly.
Engineer and buyer answers

Frequently Asked Technical Questions

Why specify C-plane sapphire for a vehicle display cover?

Crystal orientation affects material and processing behavior. C-plane optical-grade sapphire is the requested baseline, but final orientation and inspection requirements should remain explicit on the drawing and purchase specification.

Can thin sapphire include holes and irregular profiles?

Yes, subject to DFM review. Hole diameter, edge distance, corner radius, chamfer, thickness, and assembly load influence manufacturability and breakage risk.

Does AR+AF coating change the inspection plan?

Yes. The plan should add reflectance or transmission criteria, coating appearance zones, adhesion or abrasion methods, cleanability, and any contact-angle requirement.

Is -40℃ to 120℃ automatically an automotive qualification?

No. It is the requested continuous working range. Program qualification requires an approved profile, sample configuration, cycle count, inspection criteria, and documented results.

What should procurement send for a quotation?

Provide the 2D or 3D drawing, annual and order quantities, thickness, coating targets, cosmetic zones, validation requirements, packaging standard, and required delivery location. The item-by-item version is listed in our custom optics RFQ checklist.

Can Felix Glass support OEM mass production?

Drawing-based sample and volume planning are supported across sapphire blank preparation, CNC machining, polishing, AR/AF coating, inspection and export packaging. Capacity, yield assumptions, inspection documentation, and schedule are confirmed after the technical review. The full capability scope is described on our optical component factory profile.

Continue your research

Explore More Felix Glass Resources

Next engineering action

Request Custom Drawing Review & Quotation

Automotive optical engineers and equipment procurement managers can send drawings and project requirements to james@felixglass.com. Include the display stack, annual volume, coating target, temperature profile, cosmetic criteria, and assembly method for a focused manufacturability review.

james@felixglass.com · +86-18565032888 · Dongguan Felix Glass Co., Ltd.

Get Custom Automotive Sapphire Cover Quotation