Custom ITO Glass Electrodes | Lab Working Electrode Slides - Felix Glass
- Price
- US $2.88-6.26
- Model
- ITO-E01 1
- MOQ
- 5 piece
Item specifics
- Substrate
- Borosilicate glass / Fused silica (quartz) optional
- ITO Layer
- In₂O₃:SnO₂, thickness 100–200 nm
- Sheet Resistance
- 5 Ω/sq, 10 Ω/sq, 15 Ω/sq, 20 Ω/sq (custom)
- Visible Transmittance
- ≥85% @ 550 nm
- Size (Standard)
- 20×20 mm, 25×75 mm (microscope slide), 50×50 mm
- Thickness
- 0.5 mm, 1.1 mm, 1.5 mm
- Surface Roughness
- ≤3 nm RMS
- Working Temp
- ≤250°C
- Chemical Stability
- Resists dilute acid/alkali/organic solvents; ethanol/acetone cleanable
- Custom Process
- Cutting, drilling, patterning, etching, edge chamfering
Review
Description
Send your drawing or sample requirement for a fast quotation. MOQ, lead time and coating options are confirmed within one business day.
ITO Glass Electrodes
for Lab Electrochemistry & Research
Electrochemistry-grade ITO glass slides — transparent working electrodes for cyclic voltammetry, spectroelectrochemistry, photoelectrochemical cells and biosensor research. Magnetron-sputtered ITO on borosilicate or fused silica, with custom cutting, drilling and electrode patterning for academic and industrial labs.
- Sheet Resistance 5 / 10 / 15 / 20 Ω/sq (Custom)
- Visible Transmittance ≥ 85% @ 550 nm
- Standard Sizes 20×20 mm, 25×75 mm, 50×50 mm
- Borosilicate or Fused Silica Substrate
- ITO Patterning / Etching for Electrode Arrays
- Chemical Stable in Electrolyte & Organic Solvents
- Small Batch & Lab Prototype Orders Welcome
Why Do Electrochemistry Labs Switch From Cheap ITO Slides?
| Pain Points With Generic ITO Slides | Felix Glass Solution |
|---|---|
| Sheet resistance drifts batch to batch, CV curves shift between runs | Our in-house magnetron sputtering workshop controls ITO thickness and sheet resistance batch-to-batch, with four-point-probe test on every lot for consistent electrochemical signals. |
| Background current is high, noisy baseline ruins low-concentration sensing | We control substrate flatness (≤3 nm RMS roughness) and ITO film cleanliness, keeping background current low enough for sensitive biosensor and trace analysis. |
| Standard size cannot fit your custom spectroelectrochemistry cell | We custom-cut ITO slides to your cell window dimension, with optional drilling, notching and edge chamfer, not a generic off-the-shelf microscope slide. |
| ITO film peels or discolors after solvent cleaning or electrolyte contact | Optimized sputtering process and post-coating annealing keep ITO film stable in dilute acid, alkali and common organic solvents (ethanol, acetone, methanol). |
| No UV transmission, deep-UV spectroelectrochemistry blocked | We offer fused silica (quartz) ITO slides for UV-Vis-NIR 185–3500 nm range, when borosilicate cuts off below 320 nm. |
| Supplier enforces high MOQ, hard for academic lab orders | We support small-batch and prototype orders for university and industrial R&D labs, with fast sampling and global shipping. |
| Hard to find supplier who can do custom electrode patterning and etching | We provide ITO patterning, etching and electrode array services in-house, matching your microfluidic or sensor chip layout. |
Why Academic & Industrial Labs Work With Felix Glass
Optical Glass Processing Experience
Standard ITO Resistance Grade
Visible Transmittance @ 550 nm
Surface Roughness RMS
Sample & Prototype Orders Welcome
Fast Delivery to Research Labs
*Actual resistance, size and lead time depend on substrate, patterning and quantity.
One supplier from substrate cutting to ITO sputtering and electrode patterning. We control borosilicate / fused silica cutting, magnetron ITO coating, four-point-probe testing and ultrasonic cleaning, so your electrochemistry experiments get consistent, low-noise transparent working electrodes batch after batch.
ITO Glass Slides Engineered for Your Experiment
Three-Electrode Cell Working Electrode
Standard ITO slide as transparent working electrode in 3-electrode cells for cyclic voltammetry (CV), chronoamperometry and impedance testing.
- 10-20 Ω/sq standard grade for general CV
- Low background current for stable baseline
- 20×20 mm, 25×75 mm standard sizes
- Custom cut to fit your cell window
Recommended Solution: Borosilicate Substrate + 10-20 Ω/sq ITO + Edge Chamfer
Discuss Your CV Setup →Spectroelectrochemistry & In-Situ Optics
High-transmittance ITO slide for spectroelectrochemical cells, combining electrochemical control with in-situ UV-Vis optical monitoring.
- ≥85% visible transmittance for clean spectra
- Quartz substrate for UV range down to 185 nm
- Optical-grade polished surface
- Thickness matched to your spectrophotometer
Recommended Solution: Fused Silica Substrate + ITO Coating + Optical Polish
Discuss Your Spectro Cell →Photoelectrochemistry & Biosensors
Custom-patterned ITO slide for photoelectrochemical cells, photocatalysis, biosensors, electrochromic devices and microfluidic chips.
- Custom ITO etching for electrode arrays
- Quartz substrate for photocatalysis UV transmission
- Low roughness for uniform surface modification
- Drilled / notched contact pads
Recommended Solution: Borosilicate or Quartz + Patterned ITO + Drilled Contact Pads
Discuss Your Sensor Chip →Not Sure ITO or FTO?
Choosing between ITO and FTO depends on pH range, temperature and optical requirement. We supply both, and our engineers can help you select.
- ITO: lower resistance, better for CV and biosensors
- FTO: wider pH and high-temperature stability
- Both available in borosilicate and quartz
- Send your electrolyte pH and temperature range
Recommended Solution: Tell Us Your Electrolyte & Temperature, We Recommend ITO or FTO
Ask Which Conductive Glass Fits Your Experiment →Core Technical Specifications
| Item | Parameter |
|---|---|
| Substrate | Borosilicate glass / Fused silica (quartz) optional |
| ITO Layer | In₂O₃:SnO₂, thickness 100-200 nm, magnetron sputtered |
| Sheet Resistance | 5 / 10 / 15 / 20 Ω/sq, custom target on request |
| Visible Transmittance | ≥ 85% @ 550 nm (standard grade) |
| Standard Size | 20×20 mm, 25×75 mm (microscope slide), 50×50 mm |
| Thickness | 0.5 mm, 1.1 mm, 1.5 mm, custom on request |
| Surface Roughness | ≤ 3 nm RMS |
| Working Temperature | ≤ 250°C continuous |
| Chemical Stability | Resists dilute acid / alkali / organic solvents; ethanol, acetone cleanable |
| Custom Process | Cutting, drilling, patterning, etching, edge chamfering |
*Subject to substrate, resistance grade, patterning and quantity.
Typical ITO Electrode Project Examples
University CV Lab ITO Slide Order
Customer Requirement
Custom 25×75 mm borosilicate ITO slides at 15 Ω/sq for undergraduate cyclic voltammetry teaching lab, low noise baseline, consistent across a class set.
Our Solution
Borosilicate substrate precision cutting, magnetron sputtered ITO (target 15 Ω/sq), four-point-probe resistance test per slide, ultrasonic clean and individual packaging.
Typical Project Outcome
Sample batch delivered in 5 days, approved by the teaching lab, reordered each semester for class experiments.
Industrial Biosensor Patterned ITO Project
Customer Requirement
Custom-patterned ITO on quartz substrate for a medical biosensor chip, electrode array layout per customer drawing, drilled contact pads, UV transmission for optical readout.
Our Solution
Quartz substrate cutting and polishing, ITO sputtering, custom photolithography patterning per drawing, drilled contact pads, batch resistance and optical inspection.
Typical Project Outcome
Prototype chips delivered on schedule, validated under customer's biosensor assembly, approved for follow-up pilot production.
From Cell Drawing to Finished ITO Slide
01 Drawing Review
Verify slide dimension, thickness, target sheet resistance, substrate and patterning layout to formulate production plan.
02 Material Selection
Select borosilicate for general electrochemistry or fused silica for UV / photoelectrochemistry.
03 Precision Cutting
Substrate cutting to standard 20×20, 25×75, 50×50 mm or custom size per drawing.
04 Drilling & Edge
CNC drilling of contact pads, notching and edge chamfering to fit your cell.
05 Polishing & Cleaning
Optical surface polishing for low roughness, strict ultrasonic cleaning before coating.
06 ITO Sputtering
Magnetron sputtering to achieve target 5-20 Ω/sq, with post-coating annealing for film stability.
07 Patterning (If Needed)
Custom ITO etching and electrode array patterning per your sensor or chip layout.
08 QC & Packaging
Four-point-probe resistance test, transmittance test, roughness check and individual clean packaging.
Why Start With a Small ITO Slide Sample?
01 Verify Cell Fit
Confirm slide dimension, thickness and contact pad position fit your electrochemistry cell before bulk order.
02 Test Electrochemical Performance
Evaluate sheet resistance, baseline noise and transmittance under your real electrolyte and optical setup.
03 Reduce Research Risk
Validate substrate, resistance and patterning with a small sample batch before committing to production quantity.
Not Sure Which ITO Slide Configuration You Need?
| Your Requirement | Recommended Solution |
|---|---|
| General CV, chronoamperometry, teaching lab | Borosilicate ITO, 10-20 Ω/sq, 25×75 mm |
| High-current experiment, low sheet resistance needed | Borosilicate ITO, 5 Ω/sq grade |
| UV spectroelectrochemistry, photocatalysis below 320 nm | Fused Silica Quartz ITO, UV-Vis-NIR 185-3500 nm |
| Biosensor, microfluidic chip, electrode array | Patterned ITO with custom etching and drilled contact pads |
| pH extreme, high-temperature electrolyte | Consider FTO conductive glass instead of ITO |
| Custom cell window, non-standard size | CNC cut to your drawing, with edge chamfer |
| Academic R&D, small quantity prototype | Small-batch sample order, fast sampling |
Still confused about substrate or resistance grade? Ask Our Engineers for Free Guidance
Frequently Asked Questions
Request Custom ITO Glass Slides for Your Lab
Tell us your cell setup and resistance target. Our engineers will recommend a matched ITO slide configuration and quote fast.
Before You Send Your Inquiry, Prepare These Inputs
- Application: CV / chronoamperometry, spectroelectrochemistry, photoelectrochemistry, biosensor, microfluidic, or other
- Substrate: borosilicate (general) / fused silica quartz (UV)
- Size & thickness: 20×20, 25×75, 50×50 mm, or custom dimension
- Sheet resistance target: e.g. 5 / 10 / 15 / 20 Ω/sq
- Patterning: none, or custom electrode array drawing / mask
- Electrolyte & temperature: pH range, working temperature (helps us recommend ITO vs FTO)
- Quantity: small lab batch, prototype, or ongoing bulk supply
Free engineering review · small-batch sample support · 19+ years optical glass manufacturing
Explore More ITO Research Resources
- What is ITO conductive glass? Properties and uses — material overview for electrochem labs
- ITO sheet resistance explained: ohms per square — how to pick the right resistance grade
- ITO glass transmission and conductivity — optical trade-offs for spectroelectrochemistry
- ITO glass cleaning and handling guide — how to prep slides before experiments
- China custom optical component manufacturer — 19+ years factory capability and QC workflow
Have an Electrochemistry ITO Slide Project? Let's Review It.
Send your cell dimension, resistance target or patterning drawing. You don't need to finalize every spec. Our engineers will recommend the right substrate and ITO grade for your experiment.
Free engineering review · small-batch sample support · OEM/ODM manufacturing












