Custom FTO Conductive Glass | Lab Photocatalysis PEC - Felix Glass
Custom FTO Conductive Glass | Lab Photocatalysis PEC - Felix Glass
Custom FTO Conductive Glass | Lab Photocatalysis PEC - Felix Glass
Custom FTO Conductive Glass | Lab Photocatalysis PEC - Felix Glass
Custom FTO Conductive Glass | Lab Photocatalysis PEC - Felix Glass
Custom FTO Conductive Glass | Lab Photocatalysis PEC - Felix Glass
Price
US $2.88-6.26
Model
ITO-E01 1
MOQ
5 piece

Item specifics

Substrate
Low-iron soda lime glass
Conductive Film
FTO (SnO₂:F)
Sheet Resistance
Sheet Resistance
Visible Transmittance
≥82% @ 550nm
Standard Dimensions
20×20mm, 25×75mm, 50×50mm
Glass Thickness
1.1mm, 2.2mm, 3.0mm
Max Operating Temperature
≤500°C
Surface Roughness
10–25 nm RMS
Chemical Resistance
Stable in dilute acid, alkali and common organic solvents
Custom Processing
Cutting, drilling, edge chamfering, FTO etching & patterning

Review

Description

Custom FTO Conductive Glass

Send your drawing or sample requirement for a fast quotation. MOQ, lead time and coating options are confirmed within one business day.

Request a Quote

FTO Glass
500°C High Temp
Alkali Resistant
Photocatalysis
DSSC / PEC
Small Batch OK

FTO Conductive Glass Electrodes
for Photocatalysis, PEC & Solar Cell Research

Lab-grade FTO (Fluorine-doped Tin Oxide) conductive glass on low-iron soda lime substrate. Stable to 500°C, alkali-resistant and cost-effective for high-temperature calcination, water splitting, dye-sensitized solar cells and electrochemistry experiments — where ITO film would degrade.

  • Max Operating Temperature ≤ 500°C (ITO typically fails above 250°C)
  • Sheet Resistance 8 / 10 / 13 / 15 Ω/sq
  • Visible Transmittance ≥ 82% @ 550 nm
  • Low-Iron Soda Lime Glass Substrate
  • Stable in Dilute Acid, Alkali & Organic Solvents
  • Natural Rough Surface for Catalyst Adhesion
  • Custom Cutting, Drilling & FTO Etching / Patterning
Engineering Commitment: Send your experiment type (photocatalysis, PEC water splitting, DSSC, CV or sensor), target sheet resistance, slide size and patterning requirement. Our engineers will recommend whether FTO or ITO fits your setup, and quote fast for lab sample batches.
FTO conductive glass electrodes for lab photocatalysis and PEC research

Why Do Researchers Switch From ITO to FTO Glass?

Pain Points When ITO Fails in the Lab Felix Glass FTO Solution
ITO film peels or loses conductivity after 400-500°C calcination for photocatalyst deposition FTO coating maintains stable conductivity up to 500°C, tolerating the high-temperature annealing steps common in photocatalysis and solar cell fabrication.
ITO degrades quickly in alkaline electrolyte, PEC water splitting signals drift FTO is far more stable in alkaline and strong-acid electrolytes than ITO, making it the standard for water splitting and harsh electrochemistry.
ITO substrate too expensive for repeated student / class experiments FTO on soda lime is more cost-effective than quartz-based ITO, suitable for repeated lab testing and teaching labs.
Catalyst slurry peels off smooth ITO surface during PEC operation FTO's natural micro-rough surface (10-25 nm RMS) improves catalyst loading and adhesion on the photoelectrode.
Off-the-shelf ITO slides cannot fit custom PEC cell geometry or mask pattern Custom cutting, drilling, notching and selective FTO etching for your electrode circuit and cell window.
Supplier enforces high MOQ, hard for academic R&D orders Small-batch and prototype orders welcome for university and industrial research labs.
Hard to find a supplier who can explain FTO vs ITO trade-off We supply both FTO and ITO — our engineers will honestly recommend which material fits your pH, temperature and optical requirement.

Why Research Labs Work With Felix Glass FTO

19+ Years

Optical Glass Manufacturing Experience

≤500°C

Max Operating Temperature

8-15 Ω/sq

Standard FTO Resistance Grade

≥82%

Visible Transmittance @ 550 nm

Small Batch

Sample & Prototype Orders Welcome

Global Ship

Fast Delivery to University Labs

*Actual resistance, size and lead time depend on substrate, patterning and quantity.

One supplier from soda lime cutting to FTO coating, etching and four-point-probe testing. We control the full process in-house, so your photocatalysis, DSSC and PEC experiments get consistent, batch-to-batch comparable conductive glass substrates.

FTO Glass Engineered for Your Research

PEC Water Splitting & Photocatalysis

Transparent conductive substrate for photoelectrochemical cells, semiconductor film deposition and photocatalyst testing under alkaline conditions.

  • Stable to 500°C for catalyst calcination
  • Alkali-resistant for water splitting electrolyte
  • Rough surface improves catalyst adhesion
  • 10-13 Ω/sq standard grade

Recommended Solution: Soda Lime FTO + 10-13 Ω/sq + Custom Cut to Cell Window

Discuss Your PEC Setup →

DSSC & Perovskite Solar Cells

Standard transparent conductive substrate for dye-sensitized solar cells (DSSC) and perovskite solar cell research, with high-temperature sintering tolerance.

  • Tolerates 400-500°C TiO₂ paste sintering
  • Uniform conductivity across the cell
  • 2.2 mm / 3.0 mm thickness for mechanical stability
  • Custom etched contact pads

Recommended Solution: Soda Lime FTO + 1.1 / 2.2 / 3.0 mm + Etched Patterns

Discuss Your Solar Cell Project →

High-Temperature & Harsh Electrochemistry

When your experiment involves strong acid, strong alkali or elevated temperature, FTO outperforms ITO as the transparent working electrode.

  • Stable in extreme pH vs ITO
  • Withstands thermal treatment steps
  • Low cost for repeated testing
  • Custom etching for 3-electrode cells

Recommended Solution: Tell Us Your pH & Temperature, We Confirm FTO Grade

Discuss Your Electrochem Setup →

Not Sure FTO or ITO?

Choosing between FTO and ITO depends on temperature, pH and optical requirement. We supply both and can honestly recommend.

  • FTO: 500°C, alkali-resistant, lower cost
  • ITO: higher transmittance, smoother surface, room-temp
  • Both available in custom sizes and patterns
  • Send your experiment conditions

Recommended Solution: Tell Us Your Experiment, We Recommend FTO or ITO

View ITO Electrode Slides →

Core Technical Specifications

ItemParameter
Base SubstrateLow-iron soda lime glass
Conductive FilmFTO (Fluorine-doped Tin Oxide, SnO₂:F), magnetron sputtered
Sheet Resistance8 / 10 / 13 / 15 Ω/sq, custom on request
Visible Transmittance≥ 82% @ 550 nm
Standard Dimensions20×20 mm, 25×75 mm, 50×50 mm
Glass Thickness1.1 mm, 2.2 mm, 3.0 mm
Max Operating Temperature≤ 500°C continuous
Surface Roughness10-25 nm RMS (natural micro-rough for catalyst adhesion)
Chemical ResistanceStable in dilute acid, alkali and common organic solvents
Custom ProcessingCutting, drilling, edge chamfering, FTO etching & patterning

*Subject to resistance grade, size, patterning and quantity.

Typical FTO Electrode Project Examples

University Photocatalysis Research Batch

Customer Requirement

Materials science lab needing FTO slides for photocatalyst deposition and PEC water splitting measurements, 25×75 mm, 10-13 Ω/sq, small batch for a graduate student project.

Our Solution

Soda lime FTO cutting to 25×75 mm, magnetron sputtered FTO (10-13 Ω/sq target), four-point-probe test per slide, clean packaging, small-batch sampling.

Typical Project Outcome

Samples delivered in 5 days, approved for catalyst deposition experiments, reordered each semester for the research group.

DSSC Lab Custom Etching Order

Customer Requirement

Solar cell research group needing patterned FTO substrates for DSSC, custom etched current collector grid per their cell design, 2.2 mm thickness for mechanical stability.

Our Solution

Soda lime FTO cutting, selective FTO etching per drawing, drilled access holes, batch resistance and transmittance inspection, small prototype batch.

Typical Project Outcome

Prototype substrates delivered on schedule, validated under customer's DSSC fabrication process, approved for follow-up pilot order.

From Cell Drawing to Tested FTO Electrode

01 Drawing Review

Verify size, thickness, target resistance, substrate and patterning layout for your experiment.

02 Soda Lime Cutting

Low-iron soda lime cutting to standard or custom dimension.

03 Drilling & Edge

CNC drilling of contact pads, notching and edge chamfering.

04 Cleaning

Strict ultrasonic cleaning before coating for reproducible electrode surfaces.

05 FTO Sputtering

Magnetron sputtering to target 8-15 Ω/sq, post-coating annealing for film stability.

06 Etching (If Needed)

Selective FTO etching for custom electrode circuits and current collection grids.

07 QC Testing

Four-point-probe resistance test, transmittance check, visual inspection.

08 Clean Packaging

Individual clean packaging ready for your lab experiment.

Why Start With a Small FTO Sample?

01 Verify FTO vs ITO Fit

Test whether FTO's 500°C stability and alkali resistance match your real experiment conditions.

02 Confirm Cell Geometry

Validate cutout, contact pad and etching pattern fit your PEC or DSSC cell.

03 Reduce Research Cost

Small sample batches are affordable for academic R&D before committing to bulk.

FTO or ITO? Quick Selection Guide

Your Experiment ConditionRecommended Material
Photocatalysis calcination above 300°C, PEC water splittingFTO (tolerates 500°C, alkali stable)
DSSC / perovskite solar cell sintering stepFTO standard grade, custom etched grid
Strong acid or strong alkali electrolyteFTO (ITO degrades in harsh pH)
Room-temperature CV, spectroelectrochemistry, UV optical monitoringITO (higher transmittance, smoother surface)
Biosensor, microfluidic chip, in-situ optical readoutITO (low roughness, high transparency)
Large-batch teaching lab, cost-sensitiveFTO on soda lime (more cost-effective)
Not sure — send pH, temperature and optical requirementAsk our engineers for honest recommendation

Still unsure? Ask Our Engineers for Free FTO vs ITO Guidance

Frequently Asked Questions

Q: What is FTO glass mainly used for in the lab?
A: FTO (Fluorine-doped Tin Oxide) conductive glass serves as transparent conductive working or counter electrodes for photocatalysis, photoelectrochemical (PEC) water splitting, dye-sensitized solar cells (DSSC), perovskite solar cell research and high-temperature electrochemistry.
Q: What is the difference between FTO and ITO glass?
A: FTO withstands up to 500°C and is far more stable in alkaline and strong-acid electrolytes. ITO offers higher visible transmittance (≥85% vs FTO's ≥82%) and a much smoother surface, making it better for room-temperature spectroelectrochemistry and biosensors. For high-temperature or harsh-pH work, FTO is the standard.
Q: What sheet resistance is recommended for photocatalysis?
A: 10-13 Ω/sq is the most universal specification for most photocatalysis and PEC water splitting projects. Lower 8 Ω/sq is available for higher-current or large-area cells; 15 Ω/sq for general testing.
Q: Can FTO glass be heated under high temperature?
A: Yes. FTO coating maintains stable conductivity up to 500°C, with no film peeling or resistance surge. This is the key reason FTO is preferred for photocatalyst calcination and TiO₂ paste sintering in DSSC fabrication.
Q: Is FTO resistant to alkaline electrolytes?
A: Yes. FTO shows far better stability in alkaline solution than ITO, without rapid conductivity attenuation — making it the standard choice for water splitting research in NaOH or KOH electrolyte.
Q: Can you pattern custom FTO electrode circuits?
A: Yes. We support selective FTO etching to remove partial conductive film and create custom electrode structures, current collector grids and contact pads per your mask or drawing.
Q: What cleaning method is recommended for FTO slides?
A: Sequential ultrasonic cleaning with detergent, deionized water, ethanol and acetone, followed by nitrogen dry, is the standard prep before catalyst deposition or electrochemical experiments.
Q: Do you supply small-quantity lab samples?
A: Yes. Small trial samples are available for preliminary experimental verification, suitable for university research groups and industrial R&D labs.
Q: Why is FTO surface roughness higher than ITO?
A: FTO naturally has a micro-rough surface (10-25 nm RMS) compared with ITO's ultra-smooth finish. This rough surface actually improves catalyst loading and adhesion on photoelectrodes — a feature, not a defect, for photocatalysis.
Q: What information do you need for a quote?
A: Experiment type (photocatalysis / PEC / DSSC / CV / sensor), target sheet resistance, slide dimension and thickness, whether you need patterning (with drawing), electrolyte pH and working temperature. Incomplete specs are acceptable for preliminary evaluation.

Request Custom FTO Conductive Glass for Your Lab

Tell us your experiment type and conditions. Our engineers will recommend FTO vs ITO and quote fast.

Before You Send Your Inquiry, Prepare These Inputs

  • Experiment type: photocatalysis / PEC water splitting, DSSC / perovskite, CV, electrochromic, biosensor, or other
  • Sheet resistance target: e.g. 8 / 10 / 13 / 15 Ω/sq
  • Size & thickness: 20×20, 25×75, 50×50 mm, or custom dimension
  • Working temperature: room temp vs high-temperature calcination (helps us confirm FTO vs ITO)
  • Electrolyte pH: neutral, alkaline, or strong acid (helps us confirm material stability)
  • Patterning: none, or custom electrode circuit / current collector grid drawing
  • Quantity: small lab sample, prototype, or ongoing research group supply
Submit Your FTO RFQ Email James Directly

Free FTO vs ITO guidance · small-batch sample support · 19+ years optical glass manufacturing

Explore More Conductive Glass Resources

Have a Photocatalysis, PEC or Solar Cell Project? Let's Review It.

Send your experiment conditions or drawing. You don't need to finalize every spec. Our engineers will recommend whether FTO or ITO fits your setup.

Free engineering review · small-batch sample support · OEM/ODM manufacturing